12 new beautiful colors give you the look of frosted glass with the properties of solid surface at an affordable price.

Learn more

Please watch for our new product "ICELANTIK" by Vendura on the DIY network "I HATE MY BATH." The episode title is "Zen Master Bath."

For more information and scheduled air times please visit


Vendura® Vanity Order Form

Please fill out the form below.

Customer Information

City: State:  Zip: 
Phone*: Fax: 

Step 1: Define color, width and depth of counter top.

Determine deck color » View color chart
html ajax
Determine overall width in inches
Select vanity cabinet depth:
  • Must have minimum 25" width to fit bowl
  • Must have minimum 25" depth to fit wavebowl

Step 2: Specify Backsplash

Select a backsplash

4" cove backsplash
4" set on backsplash

Step 3: Specify Sidesplash

Left set on splash

Right set on splash

Step 4: Choose bowl placement

Select a bowl placement.

Right side
Distance in inches from
right side center
Left side
Distance in inches from
left side center
Double bowl

Left and right side distance

Step 5:Choose bowl design

Select a design.

13 3/8" x 18 3/8" x 6 1/4"
Adonis Recessed
18" x 21 11/16" x 6 1/4"
Concordia L Oval
13 3/4" x 17 1/4" x 6 1/4"
Concordia Recessed L Oval
18 1/8" x 21 5/8" x 6 1/4"
Concordia Recessed S Oval
16" x 20" x 6 1/2"
Concordia S Oval
10 5/16" x 16 1/8" x 6 1/2"
13 5/8" x 19 5/8" x 6 3/4"
Venus Recessed
18 3/16" x 24 3/16" x 6 3/4"
Hemisphere Bowl
18" x 18" x 6 1/4"
Wave Bowl
25" x 12 3/4" x 8"

Step 6: Choose bowl color

Select bowl color » View color chart

Step 7: Select edge thickness

Choose an edge thickness.

1 inch - Standard edge thickness. "Eased" profile is the only profile available with this thickness.

1.5 inches - Optional. *Select this thickness if you would like an profile other than "Eased. See profile selections in Step 8 below."

Step 8: Select edge profile and location

Choose an edge profile. "Eased" profile comes standard with a 1-inch edge thickness.

*There is an additional charge for other profiles, which require a 1.5-inch thickness.

Large Ogee*
Chamfer Roundover*

Select finished edge location. You may have up to three finished edges

Step 9: Select faucet drilling location

Indicate drilling location.


Center hole only
4" on center
8" on center

Step 10: Submit

A representative will contact you with pricing and lead time.
Thank you for considering Vendura®.